TECRYL-D3

TECRYL D3 and a waterproofing component, mono, is a 100% acrylic flexible waterproofing product that provides cold vulcanized cover on the spot.
TECRYL D3 is an acrylic base flexible waterproofing product that is cold applicable and ready to be used so burners and boilers are not needed. It doesn’t present any emend so there aren’t weak points along it.
TECRYL D3 is produced according to the highest quality standards and it is applied as a waterproofing and rubberizing cover along with good adherence, excellent thermal stability and high resistance to ultraviolet ray action, as there is molecular humectation process that makes it more elastic and flexible what provides better structure mainly in the expansion joints and fissures.
Due to its technical qualities, TECRYL D3 has been used in several areas where traditional covers are ineffective.
It offers low cost, easy application, high performance and durability.
TECRYL D3 is recommended to waterproof rooftops, gutters, reservoirs, awnings, plant pots, and roof and water tanks; pipe line external protection at normal room temperature and metallic structures in general. It can also be applied on hard waterproofing surfaces and as heat reflection painting. It is a material obtained from acrylic ester polymerization; it doesn’t present any change when there is direct or permanent water contact, avoiding contamination. So, it is the best material for water tanks.
If it is necessary to tear the cover in order to assemble antennas, antenna protector, pipe lines and others, the recomposition is done without monolithicity loss, keeping the initial features.

The surface

The surface can be regular or not, with straight finishing or not but it should be cleaned, without anything, with or without slope. In case of tubular or metallic structures, these shouldn’t have anything free, clean surfaces and with rust protection.

How to use the product

The monocomponent TECRYL D3 is ready to be used, it just need to be homogenized and applied to the brush, lamb’s wool roller, soft paintbrush or brush, 4 or 5 crossed layers, having a consumption of 2kg/m2.

The breaks between coats depend on the place and if the other coat is dry and thin. Normally, the break between coats is 30 minutes when it is hot and ventilated. If there are fissures, dilatation, hydrostatic pressure (swimming pools, reservoirs, water tanks and others), it is recommended to apply a polyester gauze, square mesh so that it can give shape to the thin layer, resisting to the traction.
It is not advisable to be applied on rainy days, but in protected areas, respecting breaks between coats due to product drying. For example: water tanks (reform) from 5 to 7 days of cure.

Package

TECRYL D3 comes in gray, white, blue, shingle ,green, black and under consultation:
1 kg plastic pot
3,6 kg plastic gallon
18kg plastic bucket
60kg plastic drum

Technical features

It is not toxic and it doesn’t cause any type of harsh or allergy. In case of accident with the eyes, wash them with running water. Even though the product doesn’t have any toxicity, it should be applied with IPE.

Technical assistance

J.L BUENO INDUSTRIA E COMÈRCIO, the product manufacturer, has in its production and representative units, technical assistance to any doubt about the product line.

Important information

• KEEP THE PACKAGE CLOSED IN A DRY AND AIRED PLACE.
• DON’T ADD WATER, SOLVENT OR ANY OTHER TYPE OF PRODUCT.
• IN AREAS WHERE TRAFFIC IS HIGH, A PROTECTION IS NEEDED.
• NON TOXIC PRODUCT AND NON INFLAMMABLE.
• 2-YEAR VALIDITY IF THE STOCKPILING NORMS ARE FOLLOWED.
• DON’T APLLY IT ON HUMID OR WET SURFACE.
• ON DILATED AREAS, HYDROSTATIC PRESSURE (SWIMMING POOLS, RESERVOIRS AND WATER TANKS), FISSURES OR RUPTURING, WE RECOMMEND TO HAVE REINFORCEMENT WITH POLYESTER GAUZE BETWEEN LAYERS. .
• THE WATERPROOFING PRODUCT TECRYL D3 ACCEPTS MORTAR.
• IN HIGHLY WET AND CLOSED PLACES AS WATER TANKS AND REFORMED RESERVOIRS, WE RECOMMENT A 5 TO 7 – DAY CURE TIME.
• THE SURFACE OR SUBSTRATUM SHOULD BE SMOOTH WITH CEMENT MORTAR AND SAND (RATIO 1:3).