Product developed with special acrylic resin and polyurethane that is highly resistant to pedestrian traffic and vehicles in cementitious flooring when applied correctly. TECRYL FLOOR AND COLOR can be used in garages, playgrounds, sheds industries, sports courts.


Color: White, concrete, Black, Gray, Yellow demarcation, Blue Security, Green Court and

Red Oxide.

Indicated coats: 2 coats (Min.)

18L 3,6L
180/225 m² / tin / coat 36 / 45m² / gallon / coat


Application method: Brush, mohair roller, soft bonds and soft bristle brush.

Dilution: 1 (first) primer may be diluted with 10% water.

Cleaning: Water

Storage: Keep in a dry, sheltered and ventilated up to 24 months from date of manufacture.

Packaging: Can (18L), gallon (3.6 L)


It is desirable drying time 60/120 minutes per coat on hot days and or touch. Traffic of people wait 24 hrs for vehicles and it is recommended to wait for 48/72 hrs, avoiding rainy days outdoors.


TECRYL FLOOR AND COLOR is ideal to paint and protect flat finish producing a decorative effect. Sports courts, playgrounds, garages and floors in general gain new life and protection as receive TECRYL FLOOR AND COLOR


The surface must be clean, dry, free of loose particles and dust, contaminant free materials, fatty and molds.


Density 1.38 +/- 0.020 g / cm3

Brookfield Viscosity: 8000 16000CPS

pH: 8.5 to 10


The product is non-toxic and does not present any kind of irritation or allergy to investors. But it is worth noting that all chemical even showing no toxicity should be handled with PPE (Personal Protective Equipment)

In case of contact between ink and skin, wash with soap and water or with specific product for skin cleansing. In the event of contamination of eyes, rinse with plenty of water for 15 minutes and seek medical attention.


Tolerances: At constant numerical information in this technical bulletin find themselves subject to normal manufacturing tolerances.

Yield: Practical yields vary depending on the surface, the applied thickness, the application conditions, the geometry of the structure to be applied, the methods of application, weather conditions, etc.

Disclaimer: The information contained in this data sheet should not be taken as definitive: any person using the product for any other purpose than that stated on this sheet without first obtaining written confirmation from us as to the suitability of the same to the specific purpose that it is intended , do so at your own risk. All advice or information on this product (in this data sheet or elsewhere) have been compiled for your help and guidance. However, as we have no control over the quality and condition of the substrate or the many factors affecting the use and application of this product, no warranty, expressed or implied, is given or implied, as to such information. Thus, unless we specifically agree in writing to do so, we assume no liability for coverage rate, performance or (subject to law) any damage or injury resulting from the use of information or products mentioned herein. All products and / or technical assistance are provided in accordance with our Conditions of sale. We should request a copy of it. The information in this Technical Bulletin is subject to modification according to our continuous development and product improvement policy. It is your responsibility to check with the JLBUENO representative that this data sheet is current prior to using the product.