Tecryl Resina Multiuso



TECRYL RESIN MULTI ACQUA is suitable for external and internal surfaces, the aliphatic polyurethane water-based with excellent brightness, high power of adhesion, durability, stability, water-repellent, and greater resistance to ultraviolet rays.

Excellent for absorbing natural stone, tiles, brick, fiber cement tiles.


Color:. Ceramics and colorless coats Indicated: two (2) coats

Income: Low porosity 13 to 15 m 2 / lt / coat

Average porosity: 9 to 10 m 2 / lt / coat

High porosity: 7 to 8 m 2 / l / coat


Application method: Brush, mohair roller, soft spray and broaches.

Dilution: 1 (first) primer may be diluted with water only 10%

for corceramica

Cleaning: Water

Storage: Keep in a dry, sheltered and ventilated up to 24 months from the date of


Packaging: Can (18L), gallon (3.6 L)


The time interval between coats is connected to the local weather conditions, on hot days and fresh drying between coats is 30 minutes.


TECRYL RESIN MULTI ACQUA is recommended for external and internal surfaces of non-glazed ceramics, tiles, bricks, asbestos, concrete, timber leaked elements not vitrified. Not recommended for surfaces subject to traffic.


The surface must be clean, dry, free of loose particles and dust, contaminant free materials, fatty and molds.


Density 1.03 +/- 0.020 g / cm3

Brookfield viscosity: 8000 will 16000 CPS pH: 8.5 to 10


The product is non-toxic and does not present any kind of irritation or allergy to investors.

But it is worth noting that all chemical even showing no toxicity should be handled with PPE (Personal Protective Equipment)

a) In case of contact between ink and skin, wash with soap and water or with specific product for skin cleansing. In the event of contamination of eyes, rinse with plenty of water for 15 minutes and seek medical attention.


Tolerances: At constant numerical information in this technical bulletin find themselves subject to normal tolerances fabricação.Rendimento: Practical yields vary depending on the surface, the thickness applied, the application conditions, the geometry of the structure to be applied, the methods application, weather conditions, etc. Disclaimer: The information contained in this data sheet should not be taken as definitive: any person using the product for any other purpose than that stated on this sheet without first obtaining written confirmation from us as to the suitability of the same to the specific purpose that it is intended , do so at your own risk. All advice or information on this product (in this data sheet or elsewhere) have been compiled for your help and guidance. However, as we have no control over the quality and condition of the substrate or the many factors affecting the use and application of this product, no warranty, expressed or implied, is given or implied, as to such information. Thus, unless you specifically agree in writing bran, we assume no liability for coverage rate, performance or (subject to law) any damage or injury resulting from the use of information or products mentioned herein. All products and / or technical assistance are provided in accordance with our Conditions of sale. We should request a copy of it. The information in this Technical Bulletin is subject to modification according to our continuous development and product improvement policy. It is your responsibility to check with the JLBUENO representative that this data sheet is current prior to using the product.